Siser® Brick® 600 makes logos and graphics pop off garments. This extra-thick heat transfer vinyl adds depth, dimension, and texture. It's ideal for smaller logos and designs on caps, bags, shirts, jackets, and more. Being CPSIA Certified, Brick® 600 HTV is perfect for decorating children's clothing and accessories. This thermal transfer film can be cut with laser systems.
Note: Make sure to use proper cutter settings. This material is jaw-droppingly thick!
Application Instructions (Home Iron): Set iron dial between Cotton and Linen Cover design with Kraft Paper or non-stick cover sheet Place on flat, hard surface (ironing board not recommended) Press iron with medium/firm pressure for 10-15 seconds If areas lift after application, cover and press for 10 seconds. Peel carrier cold
Application Instructions (Heat Press): Cut in reverse and weed excess material Preheat garment for 2-3 seconds Apply design at 311°F / 155°C (EasyPress® users add approx. 30°) Use medium/firm pressure for 20 seconds Peel carrier cold
Laundering: Wait 24 hours before first wash Machine wash warm or cold with mild detergent Do not bleach or dry clean Dry on low dryer setting